CAS NC-200 Instrukcja Użytkownika

2

11 Remove tare on the hook. Press "TARE" key. The tare weight is cleared appers in the display window.

124. UNIT CONVERSIONS Place an item to be weight on the hook.(KILOGRAM MODE) Remove weight on the hook. Press "kg/lb" k

13Test menu ( tESt 1~5) : Display Test : Load Cell and A/D Conversion Test : The IC(CPU) Temperature Test : Battery Test : Key Test Available keys

14TEST 3 FUNCTION : The IC (CPU) Temperature TEST KEYS LCD SCREEN DESCRIPTION Display TEST 3 state Display the temperature of IC [CPU] TEST

15SET MODE How to enter SET Mode Turn on the power while pressing key , after displaying the message and then enter the SET Mode. Return t

16F 0 FUNCTION : Setting the value of Digital-Filter KEYS LCD SCREEN Setting value DESCRIPTION 00 ~ 0.9 00 : Not use Digital-Filter (Speed o

17F 4 FUNCTIN : Weight Backup KEYS LCD SCREEN Setting value DESCRIPTION 00 01 Not use Use (Zero, Tare, Status) F 5 FUNCTION : Hold Type

18In Hold state - if the weight is not changed, the current weight is not changed - if the weight is changed(above the 10% of Max capa), the current

19BATTERY OPERATION 1. CHARGE A. The rechargeable battery inside the NC scale must be charged using the voltage which don't exceed ±10% of the

203. LOW BATTERY("BAT.") SIGNAL A. To protect over-discharge of Battery, A. To protect over-discharge of Battery, BAT LAMP is on when bat

3 CONTENTS PRECAUTIONS... 4 INSTRUCTION...

21 POWER Voltage 1.5V Size AA Size(14.5 X 50.5 m/m) - Battery Place batteries in correct polarity(+)(-)direction. Note on the replacing battery Do

22ERROR MESSAGES & TROUBLE SHOOTING Err 01 Cause The Indicator can't be initialized due to platform shaking Management Put the platf

23BAT or LobAt Cause Need to recharge of battery (After display LobAt , the power is off automatically in 2 second) Management Connect the adap

24MEMO

25MEMO

26MEMO

27

28

4PRECAUTIONS

5

6INSTRUCTION We greatly appreciate your purchase of the NC-I. These goods perform excellently and exhibit splendid properties through strike tests.

7TECHNICAL SPECIFICATION Max Capacity 20kg 30kg 50kg 100kg 200kg 500kgKilogram Division 10g 10g 20g 50g 100g 200g Max Cap 200lb(100kg) 400lb(200kg

8DESCRIPTION OF OVERALL 1. OVERALL VIEW 2. DISPLAY

93.LAMP of DISPLAY PART(Front body) Power ON Being connected the Adapter Charge RED In charge GREEN Charge is completed LED RemoconReceiving pa

10THE OPERATION 1. POWER ON Press "ON/OFF" key. 2. ZERO OPERATION Press "ZERO" key when the zero point is drifted.